12f Extralink Aerial Fiber Optic Cable 12j Sm G652 D Diameter 6,3mm 1,0kn With Frp Fujikura Fibers Inside
The 12FO (12X1) Aerial Loose tube Fiber Optic Cable OS2 G.652.D HDPE Black (Part number: EX.8833) from Extralink with 12FO. All-dielectric self-supporting cable (ADSS) is strong enough to support itself between poles, being used in optical networks, in self supported overhead power lines, suspended on poles or mounted on buildings being the best solution for quick and low-cost installations since the poles are already mounted from legacy networks.
Aerial fibre optic cable is a single-mode cable with a diameter of 6.3 mm, number of fibres 12 type G652D and tensile strength 1.0 kN. The product was packaged on shuffles after 2000 m, and the price given applies to 1 meter. Optical cables are used in external overhead installation, most often hung on poles of power lines and urban electric transport lines.
Fiber optic cables self-carrying are resistant to severe weather conditions and temperature differences. The construction of the external fiber optic cable has been reinforced with two FRP rods (fiber reinforced plastic) from reference manufacturer Fujikura. The outer coating made of polyethylene is resistant to solar radiation.
Cabel for assembly | Aerial |
Cabel for assembly | Outside the building |
Fiber standard | G.652.D |
Number of fibers | 12F |
Cable diameter | 6,3mm |
Cable diameter | 6.3 |
Cable length | 2000 |
Cable type | FTTH |
Connector 1 | No |
Connector 1 gender | No |
Connector 2 | No |
Connector 2 gender | No |
Fiber mode structure | Single-mode |
Fibre optic type | G.652D |
Jacket material | High-Density Polyethylene (HDPE) |
Product colour | Black |
Tensil strenght | 1 kN |
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The specification of the OS2 fiber is generally considered as the SMF standard for the single-mode fiber. For the OS2 G.652 fiber there are 4 subcategories: G.652.A, G.652.B, G.652.C, G.652.D.
The OS2 G.652.D single-mode fibers are the most used type of fiber for networking and communications applications. The OS2 G.652.D fiber type provides a zero dispersion at 1310nm wavelength therefor it is optimized for operation in the 1310nm Wavelength. The regular performance remains on the 1550nm wavelength.
Benefits of using the OS2 G.652.D fibers:
While using a loose tube construction in cables, you can:
The loose tube construction solution can be chosen for the following applications:
HDPE (high-density polyethylene) is a jacket material that offers excellent protection against moisture, chemicals, and abrasion. It is highly resistant to impact, making it ideal for rugged applications where cables are exposed to rough handling. HDPE is also UV-resistant, and it can withstand extreme temperatures, making it a good choice for outdoor and industrial environments. However, it is less flexible than other materials, which may make it difficult to use in certain applications.