Das Koaxial-Splitter 3-Wege 1.2 GHz (Part number: 1200573) der Marke C-COR ist ein Koaxial-Splitter . Splitter teilen das Signal von einer Amtsleitung in gleiche Teile zu den Ausgängen auf, sodass die Anzahl der Ausgangsports am Splitter das Signal verringert, das in den Splitter gelangt.
A directional coupler is an unequal power divider; a splitter is an equal power divider. Both have the abbreviation TFC (trunk/feeder coupler) in their model names because they split your network’s trunk and feederlines. A line power inserter passively combines radio frequency (RF) signals with up to 90 volts alternating current (VAC) from a line power supply. This device enables a single cable to service the power and signal requirements of active modules in a broadband telecommunications networ. Directional couplers, line splitters, and line power inserters consist of a main circuit board and a housing. The housing’s environmental coating protects the module from the most severe conditions. A wire mesh gasket maintains RF integrity, while a rubber gasket prevents weather from affecting the module’s operation. A 90° rotating seizure mechanism lets you install directional couplers and splitters easily in a variety of configurations. Feed‐thru connectors can be used with cable up to 0.625‐inch in diameter. Pin connectors, which enable you to accommodate larger diameters, also give better RF performance than feed‐thru connection. All models have direct‐entry ports with heat‐shrink ridges and cable strip gauges. Line power inserter is available in two models: 9‐LPI/22A and 9‐LPI/22A‐ACM‐3. The ACM‐3 model provides heavy‐duty surge protection.