Microcable for blowing A-DQ2Y 24x1,5 216(18x12)xx/125
The 216FO (18x12) Air Blown Microduct Loose tube Fiber Optic Cable SM G.657.A1 Dielectric Unarmoured (Part number: Z049) from KDP with 216FO and Dielectric Unarmoured construction . Air blown microduct fiber cable is optimised for injection into microducts and is used in optical networks, more specifically for use in Fiber-to-the-home (FTTH) and Fiber-to-the-Desk (FTTD) networks. This technique that is lower at cost, quicker and more environmentally friendly than traditional deployment, allowing a simpler instalation with less resources.
Outdoor microcable for air-blown installation with 24 tubes stranded around thin CSM. It's small diameter and thin PE jacket provide high performance during blowing.
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3. The G.657.A1 fiber type is characterized by 10 mm minimum bending radius. These specifications of the G.657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements.
While using a loose tube construction in cables, you can:
The loose tube construction solution can be chosen for the following applications:
Dielectric unarmoured is a type of fiber optic cable protection that provides electrical isolation without the added mechanical protection of an armor layer. This type of protection is achieved by using dielectric materials such as aramid yarns or glass fibers to provide strength to the cable. Dielectric unarmoured FOC is typically used in indoor installations, where the cable is not exposed to the same level of mechanical stress and environmental factors as outdoor installations. It is also used in applications where weight and flexibility are a concern, such as in aerospace or automotive industries.
PE (polyethylene) is a versatile jacket material that offers good protection against moisture, abrasion, and chemicals. It is highly flexible and has a low coefficient of friction, which makes it easy to install and handle. PE is also resistant to UV radiation and can withstand a wide range of temperatures, making it a popular choice for outdoor and industrial applications. However, it is less flame-resistant than other materials, which may limit its use in certain environments.