Click to open expanded view

48FO (4x12) Direct Buried Cable Loose tube Fiber Optic Cable MM OM2 Metallic Armoured

€2.91
€3.58 (VAT incl.)
P/N: LH02
Twoosk ID: TP026667
Fiber Count (FO)
12
24
48

Product Details

Armored Loose tube Direct Burial Cable J/A-DQ(BN)(SR)H 4x2,3 48(4x12)xx/125

KDP

LH02

TP026667

J/A-DQ(BN)(SR)H 4x2,3 48(4x12)xx/125

New

Product Description

The 48FO (4x12) Direct Buried Cable Loose tube Fiber Optic Cable MM OM2 Metallic Armoured (Part number: LH02) from KDP with 48FO and Metallic Armoured construction . Direct buried cable is optimised for injection into ducts in optical networks and is usually directly buried or installed in ducts by air-blowing, jetted, pulled or pushed into the duct.

Indoor/Outdoor cable with up to 48 fibers in 4 tubes covered by layer of e-glass and FR-LSZH jacket with CST armouring

Application

  • This cable is suitable for indoor or outdoor use.

Characteristics

  • Optical fiber
  • Loose tube
  • Waterproof
  • Metallic Armoured
  • Corrugated steel tape
  • FRP dielectric central strength member (OD 1,0 mm)
  • UV rays resistant
  • Ripcord
  • Exterior Diameter of cable 11,5 ± 0,4 mm
  • Weight 151 Kg/km

Construction

  • Black FR-LSZH outer jacket, UV stable
Need more information about this or other related products? We have more Fiber Optics | Cables | Outdoor | Direct Buried solutions for you. Contact us.

Product Specifications

Fiber Type (ITU)
OM2 G.651.1
Fiber Count (FO)
48
Fiber per tube
12
FOC Construction
Loose tube
FOC Protection
Metallic Armoured
Jacket Material
FRNC
Outer Diameter
8.1mm-12.0mm

Fiber Type (ITU) - OM2 G.651.1

OM2 (Optical Multimode 2) is a type of multimode fiber defined by the G.651.1 standard. It has a core diameter of 50 microns and is designed for higher-bandwidth applications than OM1, supporting up to 10 Gbps over distances of up to 90 meters. OM2 is commonly used for data center applications and LANs, but is being replaced by higher-grade fibers for longer-range transmissions.

FOC Construction - Loose tube

While using a loose tube construction in cables, you can:

  • Pull and stretch without causing fractures from bending or tension;
  • Have full resistant protection of the fiber core, cladding and coating (mechanical protection and UV protection);
  • Reach optimized performances at extreme temperatures;
  • Avoid the risk of environmental damage (including water damage).

The loose tube construction solution can be chosen for the following applications:

  • Direct buried;
  • Aerial;
  • Duct;
  • Rodent resistant;
  • Indoor and outdoor;
  • Water-blocking;
  • Temperature endurance.

FOC Protection - Metallic Armoured

Metallic Armoured is a type of fiber optic cable protection designed to provide a high degree of mechanical protection against impacts, crushing, and other hazards. This protection is achieved by using an armor layer made of metal wires, tapes, or corrugated steel, which provides a high level of strength and durability. Metallic armoured FOC is commonly used in outdoor and industrial applications where the cable is exposed to harsh environments, such as oil rigs, mining operations, and military installations. This type of protection also provides additional protection against electromagnetic interference and other sources of signal distortion.

Jacket Material - FRNC

FRNC (flame-retardant, non-corrosive) is a jacket material that is designed to limit the spread of fire and reduce the emission of toxic fumes. It is used in environments where safety is a primary concern, such as hospitals, schools, and public buildings. FRNC is highly resistant to moisture and chemicals, making it suitable for harsh environments. It is also non-corrosive, which means it will not degrade over time or cause damage to other materials. However, it may be more expensive than other cable jacket materials.

Complementary Products

Visited Products