12FO (1X12) Indoor Loose tube Fiber Optic Cable OS2 G.652.D PE Dielectric Unarmoured

Fiber Type (ITU) - OS2 G.652.D

Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The specification of the OS2 fiber is generally considered as the SMF standard for the single-mode fiber. For the OS2 G.652 fiber there are 4 subcategories: G.652.A, G.652.B, G.652.C, G.652.D.

The OS2 G.652.D single-mode fibers are the most used type of fiber for networking and communications applications. The OS2 G.652.D fiber type provides a zero dispersion at 1310nm wavelength therefor it is optimized for operation in the 1310nm Wavelength. The regular performance remains on the 1550nm wavelength.

Benefits of using the OS2 G.652.D fibers:

• Backward compatibility with earlier versions;
• Lower system cost;
• Offers zero water peak and seamless splicing;
• Lower splicing losses;
• Supports longer cable runs.

FOC Construction - Loose tube

While using a loose tube construction in cables, you can:

• Pull and stretch without causing fractures from bending or tension;
• Have full resistant protection of the fiber core, cladding and coating (mechanical protection and UV protection);
• Reach optimized performances at extreme temperatures;
• Avoid the risk of environmental damage (including water damage).

The loose tube construction solution can be chosen for the following applications:

• Direct buried;
• Aerial;
• Duct;
• Rodent resistant;
• Indoor and outdoor;
• Water-blocking;
• Temperature endurance.

FOC Protection - Dielectric Unarmoured

Dielectric unarmoured is a type of fiber optic cable protection that provides electrical isolation without the added mechanical protection of an armor layer. This type of protection is achieved by using dielectric materials such as aramid yarns or glass fibers to provide strength to the cable. Dielectric unarmoured FOC is typically used in indoor installations, where the cable is not exposed to the same level of mechanical stress and environmental factors as outdoor installations. It is also used in applications where weight and flexibility are a concern, such as in aerospace or automotive industries.

Jacket Material - PE

PE (polyethylene) is a versatile jacket material that offers good protection against moisture, abrasion, and chemicals. It is highly flexible and has a low coefficient of friction, which makes it easy to install and handle. PE is also resistant to UV radiation and can withstand a wide range of temperatures, making it a popular choice for outdoor and industrial applications. However, it is less flame-resistant than other materials, which may limit its use in certain environments.