Click to open expanded view

288FO (24X12) Air Blown Microduct Loose tube Fiber Optic Cable SM OS2 G.652.D HDPE 9.3mm

€3.07
€3.78 (VAT incl.)
P/N: MK-LXS10-288-A-0X214OCBKVV-079-21
Twoosk ID: TP029070

Product Details

MetroJET MK-LXS10 loose tube microcable

Fibrain

MK-LXS10-288-A-0X214OCBKVV-079-21

TP029070

MK-LXS10-288-A-0X214OCBKVV-079-21

New

Fibrain general sales conditions and warranty terms are described in details :https://fibrain.com/warranty,227.html

Product Description

The 288FO (24X12) Air Blown Microduct Loose tube Fiber Optic Cable SM OS2 G.652.D HDPE 9.3mm (Part number: MK-LXS10-288-A-0X214OCBKVV-079-21) from Fibrain with 288FO. Air blown microduct fiber cable is optimised for injection into microducts and is used in optical networks, more specifically for use in Fiber-to-the-home (FTTH) and Fiber-to-the-Desk (FTTD) networks. This technique that is lower at cost, quicker and more environmentally friendly than traditional deployment, allowing a simpler instalation with less resources.

Application

  • Microduct cabling air-blowing system application
  • Metro networks
  • Flexible network design
  • Distribution network

Characteristics

  • HDPE, UV stabilized outer jacket with low coefficient of friction
  • Loose tubes (and fillers), SZ stranded around the FRP
  • Each PBT tube containing up to 12 optical fibres
  • Smallest outer diameter for blowing into 8mm (ID) ducts
Need more information about this or other related products? We have more Fiber Optics | Cables | Air Blown solutions for you. Contact us.

Product Specifications

Fiber Type (ITU)
OS2 G.652.D
Fiber Count (FO)
288
FOC Construction
Loose tube
Jacket Material
HDPE

Fiber Type (ITU) - OS2 G.652.D

Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The specification of the OS2 fiber is generally considered as the SMF standard for the single-mode fiber. For the OS2 G.652 fiber there are 4 subcategories: G.652.A, G.652.B, G.652.C, G.652.D.

The OS2 G.652.D single-mode fibers are the most used type of fiber for networking and communications applications. The OS2 G.652.D fiber type provides a zero dispersion at 1310nm wavelength therefor it is optimized for operation in the 1310nm Wavelength. The regular performance remains on the 1550nm wavelength.

Benefits of using the OS2 G.652.D fibers:

  • Backward compatibility with earlier versions;
  • Lower system cost;
  • Offers zero water peak and seamless splicing;
  • Lower splicing losses;
  • Supports longer cable runs.

FOC Construction - Loose tube

While using a loose tube construction in cables, you can:

  • Pull and stretch without causing fractures from bending or tension;
  • Have full resistant protection of the fiber core, cladding and coating (mechanical protection and UV protection);
  • Reach optimized performances at extreme temperatures;
  • Avoid the risk of environmental damage (including water damage).

The loose tube construction solution can be chosen for the following applications:

  • Direct buried;
  • Aerial;
  • Duct;
  • Rodent resistant;
  • Indoor and outdoor;
  • Water-blocking;
  • Temperature endurance.

Jacket Material - HDPE

HDPE (high-density polyethylene) is a jacket material that offers excellent protection against moisture, chemicals, and abrasion. It is highly resistant to impact, making it ideal for rugged applications where cables are exposed to rough handling. HDPE is also UV-resistant, and it can withstand extreme temperatures, making it a good choice for outdoor and industrial environments. However, it is less flexible than other materials, which may make it difficult to use in certain applications.

Complementary Products

Visited Products