REGplus IP20 E-DAT modul

RJ45 termination units for mounting on DIN rail TH35, according to DIN EN 60715 in electrical distributors for domestic and industrial installation. As a compact, stackable 1-port housing or up to 6-port module frame for several connections in one housing. The modular termination units can also be used as a hybrid solution for copper and fiber optic connections.

Application

• network adapter

Characteristics

• Termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations
• equipped with individual E-DAT modul RJ45 module
• cable feed 45° from the top
• plug direction 45° downwards
• component testing for Cat.6
• A to ISO/IEC 11801 Ed.2.2:2011-06
• DIN EN 50173-1:2011-09
• TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008)
• certified to GHMTcompliance with class E
• A to ISO/IEC 11801 Ed.2.2:2011-06
• DIN EN 50173-1:2011-09tested: Link up to 500 MHz
• suitable for 10 GBit Ethernet (IEEE 802.3an)
• Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
• easy to install connection of 2 to 4 pair data lines AWG 26/1 - 22/1 and stranded wires with 7 copper conductors AWG 26/7 - 22/7 to BTR 8-fold insulation displacement connectors (IDC)
• marking of conductor assignment to T568A or T568B
• easy and fast insertion of wire pairs in E-DAT modul stuffer cap
• width of 1HP allows mounting up to 12 REG plus in standard electrical distribution panels
• when mounted as a device of protection class I
• the equipotential bonding is realized directly over the top hat rail by means of an integrated equipotential plate. This has to be connected to the equipotential bonding of the building by means of a bonding terminal
• a cover protects the module against direct contact. If mounted in distributor panels with protective insulation
• protection class II is guaranteed. In this case
• it is necessary to remove the equipotential bonding spring.integrated dust protection cover (also colored)