Click to open expanded view

48FO (4X12) Air Blown Microduct Loose tube Fiber Optic Cable OS2 G.657.A1 HDPE Dielectric Unarmoured Black

€0.96
€1.18 (VAT incl.)
P/N: MK-UX8-048-U-0X2124CBKTT
Twoosk ID: TP032432

Product Details

Multi loose tube blowing microcable MK-UX8. 48 fiber. Black outer sheath.

Fibrain

MK-UX8-048-U-0X2124CBKTT

TP032432

MK-UX8-048-U-0X2124CBKTT

New

Fibrain general sales conditions and warranty terms are described in details: https://fibrain.com/cooperation-with-fibrain/

Product Description

The 48FO (4X12) Air Blown Microduct Loose tube Fiber Optic Cable OS2 G.657.A1 HDPE Dielectric Unarmoured Black (Part number: MK-UX8-048-U-0X2124CBKTT) from Fibrain with 48FO and Dielectric Unarmoured construction . Air blown microduct fiber cable is optimised for injection into microducts and is used in optical networks, more specifically for use in Fiber-to-the-home (FTTH) and Fiber-to-the-Desk (FTTD) networks. This technique that is lower at cost, quicker and more environmentally friendly than traditional deployment, allowing a simpler instalation with less resources.

Application

  • Microduct cabling air-blowing system application
  • Metro networks
  • Flexible network design
  • Distribution network

Characteristics

  • FRP strength and anti-buckling element
  • Water swellable yarns to prevent moisture ingress into the cable
  • SZ stranded cable core
  • Loose tubes (PBT Ø 1,2 mm) with thixotropic filing compound and 200 μm optical fibres
  • Suitable filler type when applicable
  • Water-swellable aramid binder
  • Polyester ripcord
  • UV stabilized black HDPE sheath

What's in the box?

  • cable reel
Need more information about this or other related products? We have more Fiber Optics | Cables | Air Blown solutions for you. Contact us.

Product Specifications

Fiber Type (ITU)
OS2 G.657.A1
Fiber Count (FO)
48
Fiber per tube
12
FOC Construction
Loose tube
FOC Protection
Dielectric Unarmoured
Jacket Material
HDPE
Indoor / Outdoor
Outdoor
Outer Diameter
6.1mm-8.0mm
Color
Black

Fiber Type (ITU) - OS2 G.657.A1

Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3. The G.657.A1 fiber type is characterized by 10 mm minimum bending radius. These specifications of the G.657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements.

FOC Construction - Loose tube

While using a loose tube construction in cables, you can:

  • Pull and stretch without causing fractures from bending or tension;
  • Have full resistant protection of the fiber core, cladding and coating (mechanical protection and UV protection);
  • Reach optimized performances at extreme temperatures;
  • Avoid the risk of environmental damage (including water damage).

The loose tube construction solution can be chosen for the following applications:

  • Direct buried;
  • Aerial;
  • Duct;
  • Rodent resistant;
  • Indoor and outdoor;
  • Water-blocking;
  • Temperature endurance.

FOC Protection - Dielectric Unarmoured

Dielectric unarmoured is a type of fiber optic cable protection that provides electrical isolation without the added mechanical protection of an armor layer. This type of protection is achieved by using dielectric materials such as aramid yarns or glass fibers to provide strength to the cable. Dielectric unarmoured FOC is typically used in indoor installations, where the cable is not exposed to the same level of mechanical stress and environmental factors as outdoor installations. It is also used in applications where weight and flexibility are a concern, such as in aerospace or automotive industries.

Jacket Material - HDPE

HDPE (high-density polyethylene) is a jacket material that offers excellent protection against moisture, chemicals, and abrasion. It is highly resistant to impact, making it ideal for rugged applications where cables are exposed to rough handling. HDPE is also UV-resistant, and it can withstand extreme temperatures, making it a good choice for outdoor and industrial environments. However, it is less flexible than other materials, which may make it difficult to use in certain applications.

Complementary Products

Visited Products