The LC/PC Fiber Pigtail OS2 0.9mm 1m TB Yellow (Part number: 101000500100005) is a Fiber Pigtails with a LC /PC connector. Fiber optic pigtail is a type of cable that is made of a connector at one end, and loose wires on the other. The pigtail connector side is used to link the equipment, while the pigtail side made of loose wires that are melted in order to be connected to the fiber cable. Pigtails can be single-mode or multi-mode, which can be accompanied by terminations like SC, FC, ST, LC, MU, MT-RJ, and others. It is normally used within the wall or rack mounted patch panel.
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The specification of the OS2 fiber is generally considered as the SMF standard for the single-mode fiber. For the OS2 G.652 fiber there are 4 subcategories: G.652.A, G.652.B, G.652.C, G.652.D.
The OS2 G.652.D single-mode fibers are the most used type of fiber for networking and communications applications. The OS2 G.652.D fiber type provides a zero dispersion at 1310nm wavelength therefor it is optimized for operation in the 1310nm Wavelength. The regular performance remains on the 1550nm wavelength.
Benefits of using the OS2 G.652.D fibers:
LC FO Connector is a small form factor fiber optic connector that uses a 1,25mm ceramic ferrule to align and connect optical fibers. Used in high-speed communication networks.Provides low insertion loss and high return loss. The connector is easy to install and provides a secure and reliable connection for both single-mode and multimode fiber optic cables. Its compact size makes it ideal for applications where space is limited, such as data centers, telecommunication rooms, and fiber-to-the-home installations.
PC (Physical Contact), is a type of polishing procedure that makes flat surfacein the ferrule end face. The optical return loss of PC connectors is >-40dB. PC connectors may only be mated with other PC or UPC connectors. It can be identified by the blue boot and is used in single-mode and multi-mode fibers. This polishing procedure is outdated and is replaced by UPC.