The SC/PC-SC/PC Fiber Patch Cord Duplex MM mRJ 50/125 1m blue (Part number: 914-41429) from HellermannTyton is a Duplex patch cord with SC/PC connector at one side and a SC/PC connector at the other one. Fiber patch cords are a type of cables that have two connectors on both ends. Optic patch cords can come in simplex (1 fiber), duplex (2 fibers) or in MPO (12 fibers). The connectors on both sides of the patch cord, allow it to be quickly connected to another device such as an optical switch or other telecommunications/computer device.
LSZH (low smoke, zero halogen) is a jacket material that is designed to limit the release of smoke and toxic fumes in the event of a fire. It is made without halogens, which makes it environmentally friendly and safe for human health. LSZH is highly resistant to moisture and chemicals, making it suitable for harsh environments. It is commonly used in public buildings, transportation systems, and other areas where safety is a primary concern. However, LSZH may be more expensive than other materials, and it may have a lower temperature rating, which may limit its use in certain applications.
A Duplex configuration is a type of cabling arrangement commonly used in data centers and telecommunication networks. It consists of a two fibers cable , terminated with two connector at each end. It is normaly used in Simplex data transmition.
SC FO Connector is a type of fiber optic connector that uses a 2.5mm ceramic ferrule to align and connect optical fibers. Used in high-speed data communication networks. Provides low insertion loss and high return loss. The connector is easy to install and provides a secure, reliable connection for both single-mode and multimode fiber optic cables. Its locking mechanism ensures a stable connection and the push-pull design makes it easy to connect and disconnect. The SC connector is commonly used in data centers, telecommunication rooms, and other high-density fiber optic installations.
PC (Physical Contact), is a type of polishing procedure that makes flat surfacein the ferrule end face. The optical return loss of PC connectors is >-40dB. PC connectors may only be mated with other PC or UPC connectors. It can be identified by the blue boot and is used in single-mode and multi-mode fibers. This polishing procedure is outdated and is replaced by UPC.