The 48FO (4x12) Duct Loose Tube Fiber Optic Cable SM G.655 Dielectric (Part number: 60023276) from Prysmian with 48FO. Conduit cables are underground cables, that may be conducted by duct or buried directly into the ground. There are several types of protections for this cable such as anti-rodent or double protection. Conduit cables are built to withstand harsh environments and are typically routed by pull or blow.
The 48FO (4x12) Duct Fiber Optic Cable G.655 Dielectric Unarmoured from Prysmian is a Duct cable with 48 fibers within 4 loose tubes. This distribution cable for optical networks has a loose tube structure with thermoplastic material, containing optical fibres that is filled with suitable water tightness compound and a outter polyethylene with 2 ripcords. It has also aramid yarns as peripheral strenght elements. The glass fiber is reinforced with plastic rod (FRP), with plastic oversheathing when needed. The optical fibers comply with ITU-T recomendations G.655 allowing high bit rate DWDM systems in the long-haul and Metro environment. To minimize your chromatic dispersion compensation CAPEX and its properties comply with standard TeraLight® NZDS fibreTeralight® Non-Zero Dispersion Shifted Fibre (NZDSF) has set the standard for high bit-rate, multi-wavelength transmission. Its unique optimization of effective area, chromatic dispersion and dispersion slope enables excellent distortion management, cost-effective operation at 10 and 40 Gbps, tight channel spacing in C and L bands, compatibility with future S band and provides full compliance with the new ITU G.656 recommendation.
For outdoor use; Installation in ducts; TeraLight® is further optimized for long-haul applications. It supports 10 Gbps transmission without dispersion compensation for distances of about 200 km, resulting in cost savings compared to standard single mode fibre. For longer distances or 40 Gpbs operation, commercially available compensating devices can be used. The same fibre also supports short-length metro systems, providing additional cost savings.
OS2 (Optical Singlemode 2) ITU G655 is a single-mode fibre with a chromatic dispersion coefficient (absolute value) that is greater than some non-zero value throughout the wavelengths larger than 1530 nm. This dispersion reduces the growth of non-linear effects that can be particularly deleterious in dense wavelength division multiplexing (DWDM) systems.
While using a loose tube construction in cables, you can:
The loose tube construction solution can be chosen for the following applications:
Single mode fiber uses a LASER light source, is a type of optical fiber with a small core diameter that allows only one mode of light to propagate. It is used in telecommunications and data transmission systems to transmit signals over long distances with low attenuation and high bandwidth. Single mode fiber is ideal for high-speed and long-distance applications, such as internet backbone networks, cable television networks, and fiber-to-the-home (FTTH) services. Its narrow core reduces the dispersion of light, allowing signals to travel further and faster than with multimode fiber.