The 192FO (8x24) Air Blown Fiber Microduct Loose tube Fiber Optic Cable SM G.657.A1 Grey (Part number: EE2M81B0001920SN) from Cablescom with 192FO. Air blown microduct fiber cable is optimised for injection into microducts and is used in optical networks, more specifically for use in Fiber-to-the-home (FTTH) and Fiber-to-the-Desk (FTTD) networks. This technique that is lower at cost, quicker and more environmentally friendly than traditional deployment, allowing a simpler instalation with less resources.
The 192FO (8x24) Air Blown Fiber Microduct Loose Tube Fiber Optic Cable SM G.657.A1 Grey from Cablescom is a Air Blown Fiber Microduct cable with 192 fibers within 8 loose tubes. This micro distribution cable for optical networks with a reduced nominal diameter, has a loose tube structure with PBT tubes filled with a thixotropic compound. A high density polyethylene sheath with incorporated non-metallic reinforcements and water-blocking tape and/or yarns, allows high blowing distance due to the excellent friction properties of the outer sheath (approx. 1500 m depending on way route) and avoids water propagation. The optical fibers comply with ITU-T recommendations G.657.A1.
For outdoor use; For access, distribution, city network and FTTx applications. It is designed to be rapidly installed by blowing in microducts in microducts Di/De 10/12 mm or 10/14 mm. These cables are used for medium or long distance telecommunications networks. Generally according to INFRATEL specification INF-ING-ST-007-18 Vers. 3.0 of 27/02/2018.
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3. The G.657.A1 fiber type is characterized by 10 mm minimum bending radius. These specifications of the G.657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements.
While using a loose tube construction in cables, you can:
The loose tube construction solution can be chosen for the following applications: