.png?locale=en "Online Service Business")
Product Details
TeraSPEED® Low Smoke Zero Halogen Riser Distribution Cable, 36 fiber multi-unit with 12 fiber subunits
CommScope
760004283
TP024464
N-036-DS-8W-FMUYL/C
New
Conditioned to https://www.commscope.com/Resources/Warranties
Product Description
The 36FO (3x12) Riser Loose Tube Fiber Optic Cable SM G.657.A1 LSZH Yellow (Part number: 760004283) from CommScope with 36FO. Riser fiber optic cable is used in indoor and outdoor optical networks, more specifically in LAN backbone, access and riser zone. Riser cables are being used more and more in big projects outdoor that's why this type of cable benefits from a special jacket for different necessities.
Application
- Fiber indoor cable
Characteristics
- Minimum Bend Radius, loaded 220 mm | 8.661 in
- Minimum Bend Radius, unloaded 147 mm | 5.787 in
- Tensile Load, long term, maximum 400 N | 89.924 lbf
- Tensile Load, short term, maximum 1335 N | 300.12 lbf
- Compression 10 N/mm | 57.101 lb/in
- Compression Test Method FOTP-41 | IEC 60794-1 E3
- Flex 100 cycles
- Flex Test Method FOTP-104 | IEC 60794-1 E6
- Impact 5.88 N-m | 52.042 in lb
- Impact Test Method FOTP-25 | IEC 60794-1 E4
- Strain See long and short term tensile loads
- Strain Test Method FOTP-33 | IEC 60794-1 E1
- Twist 10 cycles
- Twist Test Method FOTP-85 | IEC 60794-1 E7
- Vertical Rise, maximum 232 m | 761.155 ft
Construction
- Cable Type Distribution
- Construction Type Non-armored
- Fiber Type, quantity 36
- Fibers per Subunit, quantity 12
- Jacket Color Yellow
- Subunit Type Gel-free
- Subunit, quantity 3
- Total Fiber Count 36
Need more information about this or other related products? We have more Fiber Optics | Cables | Indoor solutions for you. Contact us.
Product Specifications
Fiber Type (ITU)
OS2 G.657.A1
Fiber Count (FO)
36
Fiber per tube
12
FOC Construction
Loose tube
Jacket Material
LSZH
Outer Diameter
12.1mm-16.0mm
Color
Yellow
Fiber Type (ITU) - OS2 G.657.A1
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3. The G.657.A1 fiber type is characterized by 10 mm minimum bending radius. These specifications of the G.657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements.
FOC Construction - Loose tube
While using a loose tube construction in cables, you can:
- Pull and stretch without causing fractures from bending or tension;
- Have full resistant protection of the fiber core, cladding and coating (mechanical protection and UV protection);
- Reach optimized performances at extreme temperatures;
- Avoid the risk of environmental damage (including water damage).
The loose tube construction solution can be chosen for the following applications:
- Direct buried;
- Aerial;
- Duct;
- Rodent resistant;
- Indoor and outdoor;
- Water-blocking;
- Temperature endurance.
Jacket Material - LSZH
LSZH (low smoke, zero halogen) is a jacket material that is designed to limit the release of smoke and toxic fumes in the event of a fire. It is made without halogens, which makes it environmentally friendly and safe for human health. LSZH is highly resistant to moisture and chemicals, making it suitable for harsh environments. It is commonly used in public buildings, transportation systems, and other areas where safety is a primary concern. However, LSZH may be more expensive than other materials, and it may have a lower temperature rating, which may limit its use in certain applications.
