Click to open expanded view

192FO (16x12) Air Blown Microduct Loose tube Fiber Optic Cable SM G.657.A1 Dielectric Unarmoured

€2.47
€3.04 (VAT incl.)
P/N: Z108
Twoosk ID: TP026572
Fiber Count (FO)
96
144
144
192

Product Details

Microcable for blowing A-DQ2Y 16x1,5 192(16x12)xx/125

KDP

Z108

TP026572

A-DQ2Y 16x1,5 192(16x12)xx/125

New

Product Description

The 192FO (16x12) Air Blown Microduct Loose tube Fiber Optic Cable SM G.657.A1 Dielectric Unarmoured (Part number: Z108) from KDP with 192FO and Dielectric Unarmoured construction . Air blown microduct fiber cable is optimised for injection into microducts and is used in optical networks, more specifically for use in Fiber-to-the-home (FTTH) and Fiber-to-the-Desk (FTTD) networks. This technique that is lower at cost, quicker and more environmentally friendly than traditional deployment, allowing a simpler instalation with less resources.

Outdoor microcable for air-blown installation with 16 tubes stranded around thin CSM. It's small diameter and thin PE jacket provide high performance during blowing.

Application

  • This cable is is suitable for Air-blowing.

Characteristics

  • Optical fiber
  • Loose tube
  • Waterproof
  • Dielectric Unarmoured
  • FRP dielectric central strength member (OD 1,0 mm)
  • UV rays resistant
  • Ripcord
  • Exterior Diameter of cable 8,0±0,3 mm
  • Weight 53,1 Kg/km

Construction

  • Black PE outer jacket, UV stable
Need more information about this or other related products? We have more Fiber Optics | Cables | Air Blown solutions for you. Contact us.

Product Specifications

Fiber Type (ITU)
OS2 G.657.A1
Fiber Count (FO)
192
Fiber per tube
12
FOC Construction
Loose tube
FOC Protection
Dielectric Unarmoured
Jacket Material
PE
Outer Diameter
6.1mm-8.0mm

Fiber Type (ITU) - OS2 G.657.A1

Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3. The G.657.A1 fiber type is characterized by 10 mm minimum bending radius. These specifications of the G.657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements.

FOC Construction - Loose tube

While using a loose tube construction in cables, you can:

  • Pull and stretch without causing fractures from bending or tension;
  • Have full resistant protection of the fiber core, cladding and coating (mechanical protection and UV protection);
  • Reach optimized performances at extreme temperatures;
  • Avoid the risk of environmental damage (including water damage).

The loose tube construction solution can be chosen for the following applications:

  • Direct buried;
  • Aerial;
  • Duct;
  • Rodent resistant;
  • Indoor and outdoor;
  • Water-blocking;
  • Temperature endurance.

FOC Protection - Dielectric Unarmoured

Dielectric unarmoured is a type of fiber optic cable protection that provides electrical isolation without the added mechanical protection of an armor layer. This type of protection is achieved by using dielectric materials such as aramid yarns or glass fibers to provide strength to the cable. Dielectric unarmoured FOC is typically used in indoor installations, where the cable is not exposed to the same level of mechanical stress and environmental factors as outdoor installations. It is also used in applications where weight and flexibility are a concern, such as in aerospace or automotive industries.

Jacket Material - PE

PE (polyethylene) is a versatile jacket material that offers good protection against moisture, abrasion, and chemicals. It is highly flexible and has a low coefficient of friction, which makes it easy to install and handle. PE is also resistant to UV radiation and can withstand a wide range of temperatures, making it a popular choice for outdoor and industrial applications. However, it is less flame-resistant than other materials, which may limit its use in certain environments.

Complementary Products

Visited Products