Cat 6Amodul 48 port 180°M 1.5RU stainless steel

Modular patch panels for holding connection modules and adapters in the METZ CONNECT module design or keystone design for copper and fiber optic cabling. This means that several ports can be connected individually, without special tools and, in the event of service, can also be replaced individually without having to change the entire patch panel. Another advantage is the variable assembly and mixing of RJ45, FO and coax modules for a wide variety of services. Dust protection covers or blind covers prevent the ingress of dust through the open module cutouts and the patch panels can be gradually added individually.

Application

• distribution panel

Characteristics

• 19 inch 1.5RU stainless steel module frame with 48 individual modules C6
• Amodul 180°
• certified to GHMT Cat.6
• A re-embedded PVP
• component testing for Cat.6
• A to ISO/IEC 11801 Ed.2.2:2011-06
• DIN EN 50173-1:2011-09
• TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008)
• certified to GHMT
• compliance with class E
• A up to 500 MHz to ISO/IEC 11801 Ed.2.2:2011-06
• DIN EN 50173-1:2011-09
• tested: component up to 600 MHz
• link up to 800 MHz
• suitable for 10 GBit Ethernet (IEEE 802.3an)
• Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
• connection of data lines AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC)
• migration to 25G-systems without special tools
• strain relief directly snapped on to stuffer cap of C6
• Amodul
• optional strain relief on patch panel using cable ties
• grounding bolt M6 x 10 with nut and lock washer
• incl. 30 cm grounding cable
• all fully shielded modules are connected by means of the stainless steel module frame