The SC/PC 12 Fibers Color-coded Pigtail MM OM3 900µm 2m (Part number: 101000500400006) from Opterna is a Fiber Pigtails with a SC /PC connector. Fiber optic pigtail is a type of cable that is made of a connector at one end, and loose wires on the other. The pigtail connector side is used to link the equipment, while the pigtail side made of loose wires that are melted in order to be connected to the fiber cable. Pigtails can be single-mode or multi-mode, which can be accompanied by terminations like SC, FC, ST, LC, MU, MT-RJ, and others. It is normally used within the wall or rack mounted patch panel.
OM3 (Optical Multimode 3) is a type of multimode fiber defined by the G.651.1 standard. It has a core diameter of 50 microns and is designed for higher-bandwidth applications over longer distances than OM2, supporting up to 10 Gbps over distances of up to 300 meters and 40 Gbps over distances of up to 100 meters. OM3 is commonly used for data center and enterprise networks and is optimized for use with VCSEL (Vertical-Cavity Surface-Emitting Laser) sources.
SC FO Connector is a type of fiber optic connector that uses a 2.5mm ceramic ferrule to align and connect optical fibers. Used in high-speed data communication networks. Provides low insertion loss and high return loss. The connector is easy to install and provides a secure, reliable connection for both single-mode and multimode fiber optic cables. Its locking mechanism ensures a stable connection and the push-pull design makes it easy to connect and disconnect. The SC connector is commonly used in data centers, telecommunication rooms, and other high-density fiber optic installations.
PC (Physical Contact), is a type of polishing procedure that makes flat surfacein the ferrule end face. The optical return loss of PC connectors is >-40dB. PC connectors may only be mated with other PC or UPC connectors. It can be identified by the blue boot and is used in single-mode and multi-mode fibers. This polishing procedure is outdated and is replaced by UPC.