Click to open expanded view

48FO (8X6) ADSS Aerial Flex tube Fiber Optic Cable OS2 G.657.A2 HDPE Dielectric Unarmoured Black

€1.03
€1.27 (VAT incl.)
P/N: AERO-FM-048-EM3-0XC86BKPP-079-21
Twoosk ID: TP032389
Fiber Count (FO)
48
144

Product Details

Single HDPE jacket outdoor distribution aerial and duct cable with Easy Section Modules™ AERO-FM. 48 fiber. Black outer sheath.

Fibrain

AERO-FM-048-EM3-0XC86BKPP-079-21

TP032389

AERO-FM-048-EM3-0XC86BKPP-079-21

New

Fibrain general sales conditions and warranty terms are described in details: https://fibrain.com/cooperation-with-fibrain/

Product Description

The 48FO (8X6) ADSS Aerial Flex tube Fiber Optic Cable OS2 G.657.A2 HDPE Dielectric Unarmoured Black (Part number: AERO-FM-048-EM3-0XC86BKPP-079-21) from Fibrain with 48FO and Dielectric Unarmoured construction . All-dielectric self-supporting cable (ADSS) is strong enough to support itself between poles, being used in optical networks, in self supported overhead power lines, suspended on poles or mounted on buildings being the best solution for quick and low-cost installations since the poles are already mounted from legacy networks.

Application

  • Duct cable
  • Aerial cable
  • FTTH networks
  • Fully dielectric
  • For installation along power lines with an operation voltage
  • below 150 kV and producing space potential below 4 kV.

Characteristics

  • 1,0mm ESM™ modules with 6 fibres in each module
  • Dry design, no filling compound inside ESM™
  • Water swellable and tensile strength (aramid) elements
  • FRP rods as strength and anti-buckling elements (incorporated
  • in outer jacket)
  • UV resistant black HDPE sheath
  • Polyester ripcord

What's in the box?

  • cable reel
Need more information about this or other related products? We have more Fiber Optics | Cables | Aerial solutions for you. Contact us.

Product Specifications

Fiber Type (ITU)
OS2 G.657.A2
Fiber Count (FO)
48
Fiber per tube
6
FOC Construction
Flex tube
FOC Protection
Dielectric Unarmoured
Jacket Material
HDPE
Indoor / Outdoor
Outdoor
Color
Black

Fiber Type (ITU) - OS2 G.657.A2

Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3.

The G.657.A2 fiber type is characterized by 7.5 mm minimum bending radius. These specifications of the G657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements. Find some benefits when using the G.657.A2 fiber type:

  • Low attenuation;
  • Excellent macrobend performance (low bending radius);
  • Flexibility;
  • Cost-efficiency.

FOC Construction - Flex tube

While using a flex tube construction in cables, you can:

  • Reduced installation time;
  • Easier handling, particularly in fiber distribution and termination units;
  • Fast access to fibers; easy to remove the module material with no tools required;
  • Small quantity of grease, minimizing clean-up time;
  • Avoid the risk of tube kinking (potentially causing attenuation increments or fiber breakage);
  • Simple mid-span breakout enabling single module extraction to aid distribution.

The cable flex tube construction solution can be chosen for the following applications:

  • Direct buried;
  • Rodent resistant;
  • Gunshot resistant;
  • Facade;
  • Indoor and outdoor;
  • Hybrid;
  • Underwater;
  • Tunnel.

FOC Protection - Dielectric Unarmoured

Dielectric unarmoured is a type of fiber optic cable protection that provides electrical isolation without the added mechanical protection of an armor layer. This type of protection is achieved by using dielectric materials such as aramid yarns or glass fibers to provide strength to the cable. Dielectric unarmoured FOC is typically used in indoor installations, where the cable is not exposed to the same level of mechanical stress and environmental factors as outdoor installations. It is also used in applications where weight and flexibility are a concern, such as in aerospace or automotive industries.

Jacket Material - HDPE

HDPE (high-density polyethylene) is a jacket material that offers excellent protection against moisture, chemicals, and abrasion. It is highly resistant to impact, making it ideal for rugged applications where cables are exposed to rough handling. HDPE is also UV-resistant, and it can withstand extreme temperatures, making it a good choice for outdoor and industrial environments. However, it is less flexible than other materials, which may make it difficult to use in certain applications.

Complementary Products

Visited Products