Fibrain patchcords are strengthened, thus they are resistant to mechanical damages, contrary to ordinary patchcords. PA3 - for cables terminated with two or four fiber optic connectors.
Fibrain cross-connect drop cable patchcords are specifically designed to be used in FTTH networks, between a customer outlet and an ONT equipment. Fibrain patchcords are strengthened, thus they are resistant to mechanical damages, contrary to ordinary patchcords. Therefore, each cable is constructed from flame-retardant materials, which do not emit any poisonous substances and toxic smoke (LSOH). Depending on a number of terminated fibers and a cable, the connector is clamped directly on the cable’s sheath or performed as a short fanout. PA3 - for cables terminated with two or four fiber optic connectors.
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3. The G.657.A1 fiber type is characterized by 10 mm minimum bending radius. These specifications of the G.657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements.
SC FO Connector is a type of fiber optic connector that uses a 2.5mm ceramic ferrule to align and connect optical fibers. Used in high-speed data communication networks. Provides low insertion loss and high return loss. The connector is easy to install and provides a secure, reliable connection for both single-mode and multimode fiber optic cables. Its locking mechanism ensures a stable connection and the push-pull design makes it easy to connect and disconnect. The SC connector is commonly used in data centers, telecommunication rooms, and other high-density fiber optic installations.
APC (Angled Physical Contact) FO Polish Connector Type 1 is a fiber optic connector that uses an angled endface to achieve low back reflection and insertion loss. It features a 1.25mm ceramic ferrule and is commonly used in telecommunications and data networking applications where low back reflection is critical. The APC connector offers high precision and reliability, making it suitable for use in single-mode fiber networks. However, the angled endface of the APC connector requires special polishing techniques, making it more expensive than other connector types.
.png?locale=en "Online Service Business")
