The FC/PC - MU/PC Patch Cord SX SM G652D 2m from Redislogar is a Simplex patch cord with FC/PC connector at one side and a MU/PC connector at the other one. Fiber patch cords are a type of cables that have two connectors on both ends. Optic patch cords can come in simplex (1 fiber), duplex (2 fibers) or in MPO (12 fibers). The connectors on both sides of the patch cord, allow it to be quickly connected to another device such as an optical switch or other telecommunications/computer device.
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The specification of the OS2 fiber is generally considered as the SMF standard for the single-mode fiber. For the OS2 G.652 fiber there are 4 subcategories: G.652.A, G.652.B, G.652.C, G.652.D.
The OS2 G.652.D single-mode fibers are the most used type of fiber for networking and communications applications. The OS2 G.652.D fiber type provides a zero dispersion at 1310nm wavelength therefor it is optimized for operation in the 1310nm Wavelength. The regular performance remains on the 1550nm wavelength.
Benefits of using the OS2 G.652.D fibers:
LSZH (low smoke, zero halogen) is a jacket material that is designed to limit the release of smoke and toxic fumes in the event of a fire. It is made without halogens, which makes it environmentally friendly and safe for human health. LSZH is highly resistant to moisture and chemicals, making it suitable for harsh environments. It is commonly used in public buildings, transportation systems, and other areas where safety is a primary concern. However, LSZH may be more expensive than other materials, and it may have a lower temperature rating, which may limit its use in certain applications.
A Simplex configuration is a type of cabling arrangement commonly used in data centers and telecommunication networks. It consists of a single cable , terminated with a connector at each end. It is normally used in Half Duplex or Full Duplex data transmitions.
The FC FO Connector is a type of fiber optic connector that uses a 2.5mm ceramic ferrule to align and connect optical fibers. Used in high-speed data communication networks. Provides low insertion loss and high return loss. It features a threaded body, which was designed for use in high-vibration environments, and is commonly used in single-mode or multi-mode fiber optic applications. It becoming less common, mostly used in test equipments.
PC (Physical Contact), is a type of polishing procedure that makes flat surfacein the ferrule end face. The optical return loss of PC connectors is >-40dB. PC connectors may only be mated with other PC or UPC connectors. It can be identified by the blue boot and is used in single-mode and multi-mode fibers. This polishing procedure is outdated and is replaced by UPC.