1-Port 802.3at PoE+ to 2-Ports 802.3af/at Gigabit PoE Extender

The 1-Port 802.3at PoE+ to 2-Ports 802.3af/at Gigabit PoE Extender (Part number: POE-E202) from Planet is a Power over Ethernet (PoE). PoE (Power over Ethernet) products transmit both power and data across the internal cores of an Ethernet cable technology, enabling to get power to hard-to-reach areas. Nowadays they are an integral part of homes network setup, helping to remove the need of having other power cables since PoE devices are powered by ethernet cables.

PLANET POE-E202 is a 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time.

The POE-E202 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.

Application

• Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and the long-distance IP camera distribution, PLANET POE-E202 is quite a useful Gigabit PoE extender if users have most of their network already set up, and hope to expand network communications and overcome cable distance limitations offering connections to devices in locations where traditional networking does not allow.

Characteristics

• Physical Port
• 3-port 10/100/1000BASE-T Gigabit RJ45
• 1-port data + power input
• 2-port data + power output
• Power over Ethernet
• 1-port data + power input
• Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD
• Supports PoE input power up to 30.8 watts
• 2-port data + power output
• Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE
• Up to 2 IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 25 watts for each PoE port
• Auto detects powered device (PD)
• Extends the range of PoE to an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to remote device
• Layer 2 Features
• Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Integrates address look-up engine, supporting 2K absolute MAC addresses
• 10K iumbo packet support
• IEEE 802.1Q VLAN transparency
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• Automatic address learning and address aging
• Supports CSMA/CD protocol
• Case and Installation
• No external power cable installation required
• Made of metal, desktop size design
• Wall-mountable, Plug-and-Play installation
• 0 ~ 50 degrees C operating temperature