OptiSheath® Multipurpose Enclosure 2X(1X8) Splitter/MiniModule, 6X Trays, with 8 single fibre OptiTap™ connectors

The OptiSheath® Multipurpose Enclosure 2X(1X8) Splitter/MiniModule, 6X Trays, with 8 single fibre OptiTap™ connectors (Part number: U3-8DDG-8DDG-6-2108-FW-WW) from Corning is a Fiber Termination Boxes that allow connection between multiple operators and customers.

The MPE sealed terminal has the added advantage of serving as a splice point where higher fiber count distribution cables can be branched to lower fiber count cables or to the stubbed cables of multiport terminals. Optical splitters can also be housed inside this terminal, which is particularly appropriate for distributed split PON architectures. The closure can be deployed in underground chambers, wall mounted on buildings, direct buried, or aerially installed on poles or messenger wires. Individual customer connections are achieved using OptiTap® ports located at either end of the closure body. Up to 16 ports can be accommodated, eight at either end. The terminal consists of two hinged half shells which are sealed using a reusable silicone ring and grommets. All drop ports are contained in the top half and cable entry ports in the bottom half. Fiber management inside the closure is achieved using a new simplified tray which facilitates installation time. Each tray can house a maximum of 24 splices (in a double stack) providing a maximum splice capacity for the closure of 144 splices.

Application

• OptiTip MT Connector compatible with FlexNAP™ System, MDU terminals, FDT stubbed terminals
• OptiTap Cable Assembly connector ports for customer drop terminations
• Smaller more compact size
• IP68 Rated
• Faster deployment enabling speed to revenue
• Up to 16 drop ports (8, 12, or 16); other counts available on demand and wide range of distribution cable entries with loop-through capability on main distribution cable
• Individual strain-relief for better/easier cable preparation
• Mounting for all applications: aerial (pole and hanging), façade (wall) and underground (in chamber or direct buried). Please specify bracket type when ordering.
• Flexible for many network scenarios
• Splitters can be accommodated including adding capacity after initial installation
• Highly reliable system with high closure sealing performance
• Sealed, hardened plastic enclosure protects components

Characteristics

• Design
• Buffer storage Installed
• Coloured trays On demand
• Distribution cable port count 6
• Distribution cable range 10 mm to 14 mm
  
• Heat shrink splice count per tray 24
• Main cable range 15 mm
  
• Maximum splice fiber capacity 144 splices
• Maximum tray count 6
• Sealing type Compression fittings
• Splitter module 2x(1x8)
• OptiTap® port 16
• Supported cables Flat drop cableMinicableMiniXtend® cableMicroduct compatible
• Trays pre-installed On demand
• Dimensions
• Height 365 mm
• Width 160 mm
• Depth 150 mm
• Shipping Dimensions
• Height 150 mm
• Width 365 mm
• Depth 160 mm
• Ordering Information
• Units per delivery 1/1