The 12FO (2x6) Direct Burial Flex Tube Fiber Optic Cable SM G.652.D Rodent and Mechanical Protection (Part number: EE5325G00001200NO) from Cablescom with 12FO. Direct buried cable is optimised for injection into ducts in optical networks and is usually directly buried or installed in ducts by air-blowing, jetted, pulled or pushed into the duct.
The 12FO (2x6) Direct Burial Flex Tube Fiber Optic Cable SM G.652.D Rodent and Mechanical Protection from Cablescom is a Direct Buried cable with 12 fibers within 2 flex tubes. This distribution cable for optical networks has a micromodule structure (flex tube construction) and a double polyethylene sheath reinforced with corrugated steel tape and peripheral reinforcement of hydro-swelling wicks of glass placed in a helix to prevent the progression of water inside the cable. The optical fibers comply with ITU-T recommendations G.652D (EN 60793-2 - class B 50 B 1.3)
For outdoor use; Installation in railway networks, laying directly in the ground. For use in medium-or long-distance networks.
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The specification of the OS2 fiber is generally considered as the SMF standard for the single-mode fiber. For the OS2 G.652 fiber there are 4 subcategories: G.652.A, G.652.B, G.652.C, G.652.D.
The OS2 G.652.D single-mode fibers are the most used type of fiber for networking and communications applications. The OS2 G.652.D fiber type provides a zero dispersion at 1310nm wavelength therefor it is optimized for operation in the 1310nm Wavelength. The regular performance remains on the 1550nm wavelength.
Benefits of using the OS2 G.652.D fibers:
While using a flex tube construction in cables, you can:
The cable flex tube construction solution can be chosen for the following applications:
Single mode fiber uses a LASER light source, is a type of optical fiber with a small core diameter that allows only one mode of light to propagate. It is used in telecommunications and data transmission systems to transmit signals over long distances with low attenuation and high bandwidth. Single mode fiber is ideal for high-speed and long-distance applications, such as internet backbone networks, cable television networks, and fiber-to-the-home (FTTH) services. Its narrow core reduces the dispersion of light, allowing signals to travel further and faster than with multimode fiber.