The 144FO (6x24) ADSS - Aerial Loose Tube Fiber Optic Cable SM G.652.D Dielectric Unarmoured Grey (Part number: EE2M12N00014400N) from Cablescom with 144FO and Dielectric Unarmoured construction . All-dielectric self-supporting cable (ADSS) is strong enough to support itself between poles, being used in optical networks, in self supported overhead power lines, suspended on poles or mounted on buildings being the best solution for quick and low-cost installations since the poles are already mounted from legacy networks.
The 144FO (6x24) ADSS - Aerial Loose Tube Fiber Optic Cable SM G.652.D Dielectric Unarmoured Grey from Cablescom is a ADSS-Aerial cable with 144 fibers within 6 loose tubes. This micro distribution cable for optical networks has a loose tube structure with PBT loose tubes filled with a thixotropic filling compound, a high density polyethylene sheath and a fibre-glass reinforced plastic rod, allowing high permissible pulling force and high dielectric capability. It also has water-blocking tape and/or yarns to avoid water propagation inside the cable. The optical fibers comply with ITU-T recommendations G.652.D
For outdoor use; This cable is designed for aerial self-supported installations in poles along with overhead, telecommunication or high voltage transmission lines. For medium or long distances telecommunications networks.
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The specification of the OS2 fiber is generally considered as the SMF standard for the single-mode fiber. For the OS2 G.652 fiber there are 4 subcategories: G.652.A, G.652.B, G.652.C, G.652.D.
The OS2 G.652.D single-mode fibers are the most used type of fiber for networking and communications applications. The OS2 G.652.D fiber type provides a zero dispersion at 1310nm wavelength therefor it is optimized for operation in the 1310nm Wavelength. The regular performance remains on the 1550nm wavelength.
Benefits of using the OS2 G.652.D fibers:
While using a loose tube construction in cables, you can:
The loose tube construction solution can be chosen for the following applications:
Dielectric unarmoured is a type of fiber optic cable protection that provides electrical isolation without the added mechanical protection of an armor layer. This type of protection is achieved by using dielectric materials such as aramid yarns or glass fibers to provide strength to the cable. Dielectric unarmoured FOC is typically used in indoor installations, where the cable is not exposed to the same level of mechanical stress and environmental factors as outdoor installations. It is also used in applications where weight and flexibility are a concern, such as in aerospace or automotive industries.
Single mode fiber uses a LASER light source, is a type of optical fiber with a small core diameter that allows only one mode of light to propagate. It is used in telecommunications and data transmission systems to transmit signals over long distances with low attenuation and high bandwidth. Single mode fiber is ideal for high-speed and long-distance applications, such as internet backbone networks, cable television networks, and fiber-to-the-home (FTTH) services. Its narrow core reduces the dispersion of light, allowing signals to travel further and faster than with multimode fiber.