Infinity Closure (Small)

The Infinity Closure (Small) (Part number: ) from brand Yelco Technologies is an Optical Fiber Splice Closures with fibers.

Optical fiber networks are constantly evolving and the need to get fiber closer to the end-user makes the expansion of networks an inevitable reality. Fiber optic splice closures are focal points of fiber networks due to the large quantity of cables and splices that they accommodate. Expanding a fiber network is a complex process that sometimes implies network interruptions and, consequently, unhappy customers. The Infinity Fiber Optic Splice Closure brings innovation to make that expansion process easier and, at the same time, environmentally friendly.

Application

• Expanding a fiber network is a complex process that sometimes implies network interruptions and, consequently, unhappy customers.
• The Infinity Fiber Optic Splice Closure brings innovation to make that expansion process easier and, at the same time, environmentally friendly.
• The Infinity Closure can be expanded by adding expansion rings to the unique dome. This way you can use the same dome without any waste.
• Any of the Infinity Closure models can be expanded to accommodate more fusion splices or splitters. For that, you simply add an expansion ring and the modules with the trays to configure it your way!

Characteristics

• • High-capacity closure, with expansion rings to enable closure expansion.
• • Two vertical tray stacks for high fiber count splicing.
• • The splice trays can hold 12 fusion splices, heat-shrink sleeve or ANT sleeve.
• • The splitter trays can hold:
• o 4 units of 4x4x40mm module splitters
• o 2 units of 4x4x40mm + 1 units of 4x7x55mm module splitters
• o 4 fusion splices for splitter IN fiber
• • 12 round cable ports + 1 oval port.
• o 8 round cable ports size 39mm
• o 4 round cable port size 24mm
• • Accessory for adapter SC or LC installation with full fiber protection
• • Cables can be sealed using either thermal sleeves and/or mechanical glands.
• • Multi-way entry glands allow for more cables to be accommodated inside the closure – 2 to 12 cables multi-way glands.
• • Fibers pass from stack A to stack B through the bottom of the closure by a protected tunnel
• • Central loop storage with special cassette only suitable for Micromodules cable construction type
• • The Infinity is IP68 rated and IK10 rated in any configuration.

Construction

• Dome and Base: ASA ultra-UV
• Internal Structure: Polypropylene with 20% reinforced fiber glass
• Trays: ABS
• Cable Holders: ABS + Stainless Steel
• Testing
• Closure Sealing: IP68 ; IEC 69529 (1m 180 hours)
• Environmental Testing: UV, Temperature, Humidity, Ozone and other contamination gases ; IEC/EN 60068-2-5
• Impact: IK10 ; IEC 61300-2-12