Extralink Chiron Pro 24 Ge Ports Poe 802.3af/At Managed Switch, Power 370w, 4x 10ge/Ge Sfp+
The Extralink Chiron Pro | PoE Switch | 24x RJ45 1000Mb/s PoE, 4x SFP+, L3, managed, 370W (Part number: EX.19737) from Extralink is a Power over Ethernet (PoE). PoE (Power over Ethernet) products transmit both power and data across the internal cores of an Ethernet cable technology, enabling to get power to hard-to-reach areas. Nowadays they are an integral part of homes network setup, helping to remove the need of having other power cables since PoE devices are powered by ethernet cables.
Extralink Chiron Pro is a 24-port Layer 3 switch with next-generation PoE power. It is targeted at IP MAN (metropolitan area network), government and corporate networks, Internet cafes. It is developed based on high-performance hardware and supports features such as efficient ACLs, flexible QinQ, 1:1 or N:1 VLAN switching, Ethernet OAM, carrier-level QoS and industry-level 10GE Ether-ring. It also supports Layer 3 routing protocol.
Based on an advanced distribution mechanism and an efficient cross-physical link aggregation function, the logic control plane, service control plane and service data plane are separated. This allows Extralink Chiron Pro to support continuous routing redirection at Layer 3, avoiding service interruption due to a single failure.
Chiron Prosupports telecom-level Ethernet protection protocol with less than 50 ms protection offset time, STP/RSTP/MSTP, active and backup uplinks, and LACP link aggregation to ensure high service reliability. Provides an excellent Ethernet OAM mechanism for real-time network health monitoring for rapid problem localization and detection.
Supports In-Service Software Upgrade (ISSU) to ensure uninterrupted data transfer during system upgrades. Supports various L2 multicast functions, including IGMP-Snooping, fast-leave and trans-vlan.
The advanced hardware infrastructure design implements tier-based packet scheduling and packet protection, prevents DoS-/TCP attacks related to SYN flood, UDP flood, broadcast storm or heavy traffic, and supports tier-based command-line protection, giving different levels of users different management privileges.
The Extralink Chiron Pro supports the IEEE 802.3af/at PoE standard with a total maximum power of 370W.
| LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
| Number of LAN ports | 24x [10/100/1000M (RJ45)]
|
| Number of LAN ports | 4x [10G (SFP+)]
|
| Number of PoE ports | 24x [802.3af/at (1G)]
|
| 10G support | Yes |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Depth | 210 |
| DHCP features | DHCP Option 82, DHCP client, DHCP relay, DHCP server, DHCP snooping |
| Ethernet LAN data rates | 10,100,1000 |
| Flash memory | 16 |
| Form factor | 1U |
| Height | 44 |
| Housing material | Metal |
| Installed SFP+ modules quantity | 4 |
| IP routing | Yes |
| Jumbo frames | 9000 |
| MAC address table | 16000 |
| Management | CLI - Command Line Interface |
| Management | By web browser |
| Networking standards | IEEE 802.3af, IEEE 802.3at, IEEE 802.3x |
| Noise level | 37.5 |
| Packet buffer memory | 1.5 |
| Power (W) | 370 |
| Power connector | AC-in jack |
| Power over Ethernet (PoE) | Yes |
| Power source | AC |
| Power supply included | Yes |
| Product colour | White |
| Quality of Service (QoS) support | Yes |
| Rack mount kit | Yes |
| Rack mounting | Yes |
| Rack rails | Yes |
| Stackable | No |
| Switch layer | L3 |
| Switch type | Managed |
| Switching capacity | 128 |
| Switching layer | 3 |
| Total Power over Ethernet (PoE) budget | 370 |
| Type of case | Rack (1U) |
| Virtual LAN features | Voice VLAN |
| VLAN support | Yes |
| Web-based management | Yes |
| Weight | 3 |
| Width | 440 |
