Haga clic para abrir la vista expandida

Latiguillos Ópticos Simplex LC/UPC-LC/UPC OS2 G.657.A2 1.8mm, 1m , amarillo

€1,21
€1,49 (IVA incl.)
P/N: 54101
Twoosk ID: TP026889

Detalles del Producto

Fiber Patch Cord Simplex SM G.657.A2 1.8mm. 1M

REGIONTEL

54101

TP026889

RT-PC-LC/UPC-LC/UPC-G657A2-1.8mm-1M

Nuevo

Descripción del Producto

El Latiguillos Ópticos Simplex LC/UPC-LC/UPC OS2 G.657.A2 1.8mm, 1m , amarillo (Part number: 54101) de la marca REGIONTEL es un Simplex Patch Cord con conector LC/UPC en un lado y conector LC/UPC por en el otro. Latiguillos de fibra óptica son un tipo de cables que tienen dos conectores en ambos extremos. Latiguillos de fibra pueden venir en simplex (1 fibra), dúplex (2 fibras) o en MPO (12 fibras).

Solicitud

  • Considered to be the modern replacement of the SC connector. Also, a push-pull connector, the LC utilizes a latch as opposed to the SC locking tab and with a smaller 1,25mm ferrule it is known as a small form factor connector.

Características

  • Mechanical requirements of optical cable (according to IEC60794-2-50)
  • 5.4.1 Tensile performance
  • Method: IEC 60794-1-2-E1A
  • Diameter of chuck drums and transfer devices: approximately 250mm
  • Rate of transfer device: 100 mm/min or 100N/min
  • Sample length: not less than 50m
  • Load:100N for 5 min
  • Requirements:
  • 1. Fiber attenuation at 1550nm wavelength ≤0.1dB /10m during the test.
  • 2. Maximum increase in attenuation at 1550nm wavelength ≤0.03dB after the test.
¿Necesitas más información sobre este u otros productos relacionados? Tenemos más soluciones de Fibra Óptica | Latiguillos para ti. Contáctanos.
Los clientes también buscan por: Latiguillo Optico, Latiguillo Fibra Optica, Jumper Fibra Optica, Patch Cord Fibra Optica, Cordon Fibra Optica, Cable de Fibra Optica

Especificaciones del producto

Tipo de Fibra (ITU)
OS2 G.657.A2
Diámetro externo
1.8mm
Configuración
Simplex
Tipo de Conector FO 1
LC
Tipo de Pulido FO Conector 1
UPC
Tipo de Conector FO 2
LC
Tipo de Pulido FO Conector 2
UPC
Color
Amarillo
Longitudes
1m

Tipo de Fibra (ITU) - OS2 G.657.A2

Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3.

The G.657.A2 fiber type is characterized by 7.5 mm minimum bending radius. These specifications of the G657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements. Find some benefits when using the G.657.A2 fiber type:

  • Low attenuation;
  • Excellent macrobend performance (low bending radius);
  • Flexibility;
  • Cost-efficiency.

Configuración - Simplex

Una configuración Simplex es un tipo de disposición de cableado utilizado habitualmente en centros de datos y redes de telecomunicaciones. Consiste en un único cable, terminado con un conector en cada extremo. Normalmente se utiliza en transmisiones de datos Half Duplex o Full Duplex.

Tipo de Conector FO 1 - LC

El conector LC FO es un conector de fibra óptica de pequeño formato que utiliza una férula cerámica de 1,25 mm para alinear y conectar fibras ópticas. Se utiliza en redes de comunicación de alta velocidad y ofrece bajas pérdidas de inserción y altas pérdidas de retorno. El conector es fácil de instalar y proporciona una conexión segura y fiable para cables de fibra óptica monomodo y multimodo. Su tamaño compacto lo hace ideal para aplicaciones en las que el espacio es limitado, como centros de datos, salas de telecomunicaciones e instalaciones de fibra hasta el hogar.

Tipo de Pulido FO Conector 1 - UPC

UPC (Ultra Phisical Contact), es un tipo de procedimiento de pulido que consigue una férula cónica para minimizar la interferencia de partículas de polvo en el conector. Tiene una pérdida de retorno >-50dB. Los conectores UPC solo pueden acoplarse con otros conectores UPC o PC. Se puede identificar por un arranque azul y se utiliza en fibras monomodo y multimodo.

Productos Complementarios

Productos Visitados