El Cable de Fibra Óptica 48FO (4x12) Tubo Loose ADSS - Aéreo SM G.657.A1 (Part number: 60025982) de la marca Prysmian con 48FO. El cable autoportante totalmente dieléctrico (ADSS) es lo suficientemente fuerte para sostenerse entre polos, siendo utilizado en redes ópticas, en líneas aéreas aéreas autoportantes ADSS, suspendido en postes o montado en edificios, siendo la mejor solución para instalaciones rápidas y de bajo costo. Desde los polos ya están montados a partir de redes heredadas.
The 48FO (4x12) ADSS - Aerial Fiber Optic Cable G.657.A1 from Prysmian is a ADSS-Aerial with 48 fibers within 4 loose tubes. This distribution cable for optical networks has a loose tube structure and a double sheath, inner and outer, both with one ripcord laid beneath. The inner sheath is of polyethylene material and the outer sheath has a tracking resistant compound, which allows a tracking resistant up to 25kV according to specification IEEE P 1222 §3.7 Class B, Test requirement §4.1.13, 5.1.13 and Annex A. It has also aramid yarns as peripheral strenght elements. The glass fiber is reinforced with plastic rod (FRP). The optical fibers comply with ITU-T recomendations G.657A1.
For outdoor use; Installation in ADSS-Aerial.
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3. The G.657.A1 fiber type is characterized by 10 mm minimum bending radius. These specifications of the G.657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements.
Al utilizar una construcción de tubo suelto en los cables, se puede:
La solución de construcción de tubo holgado puede elegirse para las siguientes aplicaciones:
La fibra monomodo utiliza una fuente de luz LÁSER, siendo un tipo de fibra óptica con un núcleo de pequeño diámetro que solo permite la propagación de un modo de luz. Se utiliza en telecomunicaciones y sistemas de transmisión de datos para transmitir señales a largas distancias con baja atenuación y gran ancho de banda. La fibra monomodo es ideal para aplicaciones de alta velocidad y larga distancia, como redes troncales de Internet, redes de televisión por cable y servicios de fibra hasta el hogar (FTTH). Su núcleo estrecho reduce la dispersión de la luz, lo que permite que las señales viajen más lejos y más rápido que con la fibra multimodo.