Splitter Coaxial 3 voies 1.2 GHz

Le Splitter Coaxial 3 voies 1.2 GHz (Part number: 1200573) de la marque C-COR est un Splitter Coaxial . Les répartiteurs divisent le signal d'une ligne principale en portions égales aux sorties, de sorte que la quantité de ports de sortie sur le répartiteur diminue le signal qui entre dans le répartiteur.

A directional coupler is an unequal power divider; a splitter is an equal power divider. Both have the abbreviation TFC (trunk/feeder coupler) in their model names because they split your network’s trunk and feederlines. A line power inserter passively combines radio frequency (RF) signals with up to 90 volts alternating current (VAC) from a line power supply. This device enables a single cable to service the power and signal requirements of active modules in a broadband telecommunications networ. Directional couplers, line splitters, and line power inserters consist of a main circuit board and a housing. The housing’s environmental coating protects the module from the most severe conditions. A wire mesh gasket maintains RF integrity, while a rubber gasket prevents weather from affecting the module’s operation. A 90° rotating seizure mechanism lets you install directional couplers and splitters easily in a variety of configurations. Feed‐thru connectors can be used with cable up to 0.625‐inch in diameter. Pin connectors, which enable you to accommodate larger diameters, also give better RF performance than feed‐thru connection. All models have direct‐entry ports with heat‐shrink ridges and cable strip gauges. Line power inserter is available in two models: 9‐LPI/22A and 9‐LPI/22A‐ACM‐3. The ACM‐3 model provides heavy‐duty surge protection.

Les caractéristiques

• 17‐Amp current handling capacity, with 90 VDC power capacity on all Directional Couplers and Line Splitters
• 22‐Amp current rating for Line Power Inserter
• Excellent hum‐modulation performance
• 1/2 inch hard‐line ports have extra length, creating a better seal between heat shrink and port
• Easily configured to block/restore AC power and/or add fuses
• 1 GHz capacity prepares your system for future expansion
• Backward compatibility, so that faceplates fit into both 8‐TFC and 9‐TFC housings
• Weather and RFI gaskets installed in each housing
• Line Power Inserter available in heavy‐duty surge suppression to protect system electronics
• Physical Dimensions in. (cm) 4.8 x 5.7 x 3.4 (12.2 x 14.5 x 8.6)
• Typical Weight lbs. (kg) 1.4 (0.64)