Extensor PoE 802.3at PoE+ de 1 porta para 802.3af/at Gigabit PoE de 2 portas

O Extensor PoE 802.3at PoE+ de 1 porta para 802.3af/at Gigabit PoE de 2 portas (Part number: POE-E202) da marca Planet é um Power over Ethernet. Os equipamentos PoE (Power over Ethernet) transmitem tanto energia como dados através dos núcleos internos de uma tecnologia de cabo Ethernet, permitindo levar energia a áreas de difícil acesso. Actualmente são parte integrante da configuração da rede doméstica, ajudando a eliminar a necessidade de ter outros cabos de energia, uma vez que os dispositivos PoE são alimentados por cabos ethernet.

Extensor 802.3at PoE+ de 1 porta para 802.3af/at Gigabit PoE de 2 portas

Aplicação

• Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and the long-distance IP camera distribution, PLANET POE-E202 is quite a useful Gigabit PoE extender if users have most of their network already set up, and hope to expand network communications and overcome cable distance limitations offering connections to devices in locations where traditional networking does not allow.

Características

• Physical Port
• 3-port 10/100/1000BASE-T Gigabit RJ45
• 1-port data + power input
• 2-port data + power output
• Power over Ethernet
• 1-port data + power input
• Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD
• Supports PoE input power up to 30.8 watts
• 2-port data + power output
• Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE
• Up to 2 IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 25 watts for each PoE port
• Auto detects powered device (PD)
• Extends the range of PoE to an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to remote device
• Layer 2 Features
• Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Integrates address look-up engine, supporting 2K absolute MAC addresses
• 10K iumbo packet support
• IEEE 802.1Q VLAN transparency
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• Automatic address learning and address aging
• Supports CSMA/CD protocol
• Case and Installation
• No external power cable installation required
• Made of metal, desktop size design
• Wall-mountable, Plug-and-Play installation
• 0 ~ 50 degrees C operating temperature