The Air Blown Unit 3,2mm 24x E9/125 G.657.A1 200μm (Part number: Z238) from KDP with 24FO. Air blown microduct fiber cable is optimised for injection into microducts and is used in optical networks, more specifically for use in Fiber-to-the-home (FTTH) and Fiber-to-the-Desk (FTTD) networks. This technique that is lower at cost, quicker and more environmentally friendly than traditional deployment, allowing a simpler instalation with less resources.
The 24FO (1x24) Air Blown Fiber Microduct Loose Tube Fiber Optic Cable SM G.657A1 Black from KDP is a Microduct Blowable Fiber cable with 24 fibers within 1 loose tube. This distribution microcable for optical networks has a cable outer diameter with 3,2 mm and a low friction polymer outer sheath. The optical fibers comply with ITU-T recommendations G.657A1
For outdoor use; Installation by blowing in microducts; FTTx
*For technical specifications please see attached datasheet.
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3. The G.657.A1 fiber type is characterized by 10 mm minimum bending radius. These specifications of the G.657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements.
While using a loose tube construction in cables, you can:
The loose tube construction solution can be chosen for the following applications: