Due to holiday season, the orders from December, 24th to December, 29th and January, 1st will be processed on the business days after these dates.
The SC/UPC 12x Fiber Pigtail Set MM OM4 900µm LB HV 2m (Part number: J-21-03M7-000-K24VZ12-0020) from Senko is a Fiber Pigtails with a SC /UPC connector. Fiber optic pigtail is a type of cable that is made of a connector at one end, and loose wires on the other. The pigtail connector side is used to link the equipment, while the pigtail side made of loose wires that are melted in order to be connected to the fiber cable. Pigtails can be single-mode or multi-mode, which can be accompanied by terminations like SC, FC, ST, LC, MU, MT-RJ, and others. It is normally used within the wall or rack mounted patch panel.
OM4 (Optical Multimode 4) is a type of multimode fiber defined by the G.651.1 standard. It has a core diameter of 50 microns and is designed for high-bandwidth applications over longer distances than OM3, supporting up to 10 Gbps over distances of up to 550 meters and 40 Gbps over distances of up to 150 meters. OM4 is commonly used for data center and enterprise networks and is optimized for use with VCSEL sources, offering lower attenuation and higher bandwidth than OM3.
Each type of single-mode fiber has its own area of application, and the evolution of these optical fiber specifications reflects the evolution of transmission system technology from the earliest installation of single-mode optical fiber to the present day. Choose the right fiber is very important for each project/installation. The OS2 G.657 standard single-mode fibers were developed to allow a better bending radius regarding the G.652 standard. For the OS2 G.657 fiber there are 4 subcategories: G.657.A1, G.657.A2, G.657.B2, G.657.B3.
The OS2 G.657.B3 fiber type is characterized by 5mm minimum bending radius and is used for short-reach ( < 1km) drop applications. These specifications of the G.657 fibers allow to have a better cost-efficiency due to compact cable designs and reduced space requirements.
SC FO Connector is a type of fiber optic connector that uses a 2.5mm ceramic ferrule to align and connect optical fibers. Used in high-speed data communication networks. Provides low insertion loss and high return loss. The connector is easy to install and provides a secure, reliable connection for both single-mode and multimode fiber optic cables. Its locking mechanism ensures a stable connection and the push-pull design makes it easy to connect and disconnect. The SC connector is commonly used in data centers, telecommunication rooms, and other high-density fiber optic installations.
UPC (Ultra Phisical Contact), is a type of polishing procedure that makes a connical end face ferrule minimizing the interference of dust particules in the connectors mate. It as a Return loss >-50dB. UPC connectors may only be mated with other UPC or PC connectors. It can be identified by the blue boot and is used in single-mode and multi-mode fibers.
.png?locale=en "Online Service Business")
